10web_PB270761.jpg	Building starts 1
05web_PB260757.jpg	The construction starting point, three printed sheets plus an old Tri-ang Weltrol wagon for the underframe.  The sheets created from NGRS drawings of the original.
06web_PB260758.jpg	Close up 1
07web_PB260759.JPG.jpg	close up 2
11web_PB280764.jpg	Building starts 2
20web_PB280768.jpg	First glazing added but forgot to paint card edges before fitting the glazing
21web_PB280769.jpg	showing problems of "edging in" with glazing in place
25web_PB280770.jpg	Trial fit to chassis, starting to add the inner panelling
22webPB280766.jpg	Lesson now  remembered, colour the card back before cutting the window holes
26webPB280771.jpg	View over buffers on trial fit to chassis
15_webPB280772.jpg	Balsa wood framing added to underside
30webPB290773.jpg	Seat bottom in, additional framing commenced and seat back about to go in.
31webPB290774.jpg	First seat completed second side commenced.  Note revised method with extra packing for seat bases.  Seat bases must go on before fixing the side!
35webPB290776.jpg	Both sides now attached to floor base
36webPB290777.jpg	Second seat bases have the packing exras
40webPB290779.jpg	Side framing completed.  Note the white side out proved easier to "paint in" than black side out. Lesson learnt
41webPB290780.jpg	Both seats in and main framing complete.  Noted need for extra roof former and a centre support beam and some cheats to add triangular support into the end vestibules 
45webPB300782.jpg	Sir's umbrella and boot stand (extra bracing for the sides)
50webPB300785.jpg	Extra roof former at centre of saloon where one would have been
55 webPB300788.jpg	Wire hand rails folded up from a coat hanger and Araldited on,  plus roof "timbering" from photo mounting board
60webPB300792.jpg	First layer of card "roof canvassing" drying
56webPB300793.jpg	View of roof timbering and wire support  at one end
57webPB300794.jpg	Other end view
90webPB300796.jpg	Three quarter view of completed first build.  The end veranda rails were printed on to ink jet transparency film.  So that's how I did it warts and all!
02webPB300797.jpg	Side view of first build
03webPB300798.jpg	The end with brolly and boot racks. Note veranda grill which was printed onto inkjet transparency film.
04webPB300806.jpg	Underside as at 30 Nov 07 showing Tri-ang Weltrol as sub-base
01_S_H_coach_compos.jpg	A composite view of the first build as at 30 Nov.  The following photo sequence forms a "blog" of the build process.